Cleveland Family Study
17.8.4 Step 4: Attach the Position Sensor
- Connect cable from the PIB to the main unit. The PIB cable connects to the recorder at the side of the display screen. The connector is shaped so it only fits in one way for proper connection.
- Attach the position sensor to the Velcro square on the chest band. Ensure that picture on top of position sensor, indicating correct orientation of patient's left and right, is observed (wire should be going toward participant’s head).
- Apply tape as needed to further secure the position sensor.
Note: The position sensor must be calibrated prior to applying to the participant, see 17.16.4
